A password will be e-mailed to you.

DK, Airush’s product development engineer, takes you through adjusting the trim on your Airush bar. This is applicable to any bar in the Airush range.

Step 1: Secure your lines to a fixed point.
Step 2: Run out your lines.
Step 3: Identify how much the trim has off set.
Step 4: Using a tool, pull out your lines from under the floats.
Step 5: Adjust the knot placement.
Step 6: Repeat on the other side.
Step 7: Load up and set the knots.
Step 8: Check your trim again.